Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

BITEK- А

Image Technical leaflet
Description

One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Food 1
Product

ADINGAKRIL

Image Technical leaflet
Description

One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Food 1
Product

ADINGPOKS- К

Image Technical leaflet
Description

Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Food 1
Product

FUGOFIL

Image Technical leaflet
Image color chart
Description

Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Product

HIDROKOL

Image Technical leaflet
Description

One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Food 1
Product

HIDROKOL- S

Image Technical leaflet
Description

One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Food 1
Product

HIDROKOL- SP

Image Technical leaflet
Description

One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Food 1
Product

HIDROKOL- Z

Image Technical leaflet
Description

One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Food 1
Product

STIROKOL-P

Image Technical leaflet
Description

One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Food 1
Product

ADINGPOKS- 1Т

Image Technical leaflet
Description

Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Food 1
Product

ADINGPOKS Š

Description

Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Food 1
Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

BITEK- А

Image Technical leaflet
Description

One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Food 1
Product

ADINGAKRIL

Image Technical leaflet
Description

One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Food 1
Product

ADINGPOKS- К

Image Technical leaflet
Description

Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Food 1
Product

FUGOFIL

Image Technical leaflet
Image color chart
Description

Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Product

HIDROKOL

Image Technical leaflet
Description

One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Food 1
Product

HIDROKOL- S

Image Technical leaflet
Description

One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Food 1
Product

HIDROKOL- SP

Image Technical leaflet
Description

One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Food 1
Product

HIDROKOL- Z

Image Technical leaflet
Description

One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Food 1
Product

STIROKOL-P

Image Technical leaflet
Description

One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Food 1
Product

ADINGPOKS- 1Т

Image Technical leaflet
Description

Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Food 1
Product

ADINGPOKS Š

Description

Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Food 1
Product

ADINGKOLOR

Image Technical leaflet
Description

Water-based dispersion paint. It is used for finishing of internal wall and ceiling surfaces. It has good coverage rate, vivid white colour and is resistant to bacteria. The application of Adingkolor disinfects the area.

Food 1
Product

ADINGKOLOR- F

Image Technical leaflet
Description

Acrylate façade paint for decorative and protective finishing of concrete, rendered or skim coated external wall surfaces. It is also used for repair and reconstruction of old building facades. The application of Adingkolor F provides protection to the treated surfaces against weather phenomena and prevents the occurrence of surface damages on the substrate. Prior to applying Adingkolor-F, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGKOLOR-RB

Image Technical leaflet
Image color chart
Description

Finishing paint for pools based on synthetic resins and solvents. It is used for decorative and protective finishing of concrete and rendered surfaces exposed to permanent contact with water, UV radiation, weather phenomena, as well as of surfaces maintained with the use of chemical agents. The coating meets the elasticity requirement for this type of paint.

Food 1
Product

ADINGKOLOR- RF

Image Technical leaflet
Image color chart
Description

Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Food 1
Product

ADINGMARKER

Image Technical leaflet
Image color chart
Description

Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGMARKER-P

Image Technical leaflet
Image color chart
Description

Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Food 1
Product

DEKO BETON

Image Technical leaflet
Description

Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Food 1
Product

DEKO SIL

Image Technical leaflet
Description

Transparent coating based on synthetic resins and solvents. It is used for surface impregnation and as protective finishing (lacquer) of concrete surfaces against weather phenomena and low-grade chemical aggression. The product should be diluted with Rastvoruvac P (Solvent P).In highly porous substrates, it can be used undiluted as a supplement in the application of the first layer of the solvent-based paints Adingkolor-RF and Adingmarker-P.

Food 1
Product

ADINGFAS- Z

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with coarse grained structure (polymer cement-based)It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS-Z

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

ADINGFAS

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with uniform structure (polymer cement-based).It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

PRIMER - V

Image Technical leaflet
Description

Pre-coating used for priming of internal and external surfaces prior to the application of decorative and protective finishes based on water dispersion in mortars and flooring systems. It is applied on a substrate made of concrete, asphalt, mortar, plasterboard, stone, bricks, old coatings, etc.

Food 1
Product

АDING BETOKONTAKT

Image Technical leaflet
Description

Ading Betokontakt is a material used for providing roughness in smooth surfaces, thus improving the bond between the substrate and the material applied. It is used when rendering mechanical mortar or when applying cement-based adhesives on concrete s u r f a c e s , p r e - c a s t c o n c r e t e e l e m e n t s a n d plasterboard sheets. It is recommended for positions that require an extended application time of the material (mortar or adhesive).

Food 1
Product

Dekosil V

Image Technical leaflet
Description

Product for impregnation, curing and protection of new and old concrete surfaces. It is used as a product for curing and protection of fresh concrete surfaces made of polished or stamped concrete, natural stone surfaces, concrete elements – concrete pipes, concrete paving elements, pavement curbs, old concrete surfaces, concrete slabs.

Food 1
Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

BITEK- А

Image Technical leaflet
Description

One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Food 1
Product

ADINGAKRIL

Image Technical leaflet
Description

One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Food 1
Product

ADINGPOKS- К

Image Technical leaflet
Description

Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Food 1
Product

FUGOFIL

Image Technical leaflet
Image color chart
Description

Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

ADINGPOKS- 1P EKO

Image Technical leaflet
Description

It is used as a primer for all epoxy systems from the Adingpoks programme. It is used for impregnating substrates of concrete surfaces or cement or epoxy mortar surfaces. The product is recommended to be used as a primer prior to the application of epoxy floor finish as closed substrates. It has strong substrate penetration and excellent adhesion to substrate. Good resistance to weak acid solutions, salt solutions and mineral oils. Resistant to crude oil and petroleum products. It is solvent-fre

Food 1
Product

ADINGPOKS- 1PV

Image Technical leaflet
Description

A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Food 1
Product

ADINGPOKS- 1B EKO

Image Technical leaflet
Image Color Chart
Image Declaration of performance
Image SDS 1
Image SDS 2
Description

Two-component, solvent-free epoxy coating. It is used for protective and decorative finishing of substrates made of concrete, cement mortar or steel. It is used in surfaces exposed to mechanical or chemical hazards, such as: Warehouses, garages, car parks, hospitals, manufacturing plants, laboratories, foodstuff production facilities, wine tanks, etc.

Food 1
Product

ADINGPOKS- 2 EKO

Image Technical leaflet
Image Color Chart
Description

Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Food 1
Product

ADINGPOKS- 1 EKO

Image Technical leaflet
Description

Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Food 1
Product

ADINGSTATIK EKO

Image Technical leaflet
Description

Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Food 1
Product

ADINGPOKS 1P

Image Technical leaflet
Description

Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Food 1
Product

ADINGFAVORIT

Image Technical leaflet
Description

Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Food 1
Product

PODING- К

Image Technical leaflet
Description

Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Food 1
Product

BITEK- А

Image Technical leaflet
Description

One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Food 1
Product

ADINGAKRIL

Image Technical leaflet
Description

One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Food 1
Product

ADINGPOKS- К

Image Technical leaflet
Description

Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Food 1
Product

FUGOFIL

Image Technical leaflet
Image color chart
Description

Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Details
Product

BITEK- А

Image Technical leaflet
Description

One-component, hot applied, polymer modified bituminous sealant. It is used for filling joints in concrete pavements, car parks, roads, airport runways, when installing expansion joints on bridges, storerooms, bundwalls, etc

Food 1
Product

ADINGAKRIL

Image Technical leaflet
Description

One-component flexible sealant based on acrylic emulsion. It has good adhesion to various building materials: concrete, wood, bricks, plasterboard sheets, etc. It is used for sealing movement joints of floors in garages, assembly elements, joints between wooden elements and joints in assembly works. It should be applied on cleaned, grease-free and dry joints

Food 1
Product

ADINGPOKS- К

Image Technical leaflet
Description

Three-component, solvent-free, epoxy sealant used for sealing joints in acid resistant ceramic tiles in environments exposed to chemical forces. It is also used as a material for structural repairs of concrete and reinforced concrete elements (beams, pillars, canvases, etc.).

Food 1
Product

FUGOFIL

Image Technical leaflet
Image color chart
Description

Waterproof compound for sealing joints with thickness of up to 5 mm in horizontal and vertical surfaces covered by ceramic, marble, glass, stone or concrete tiles. It is used for pointing sanitary blocks, kitchens, balconies, pools, staircases, halls, warehouses, manufacturing plants, etc.

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Product

HIDROKOL

Image Technical leaflet
Description

One-component cement-based tile adhesive. It is used for fixing floor and wall ceramic tiles in indoor premises at normal temperatures.

Food 1
Product

HIDROKOL- S

Image Technical leaflet
Description

One-component cement-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles exposed to external weather conditions, as well as premises exposed to constant contact with water and moisture: Bathrooms, kitchens, terraces, fountains, laundry rooms, etc.

Food 1
Product

HIDROKOL- SP

Image Technical leaflet
Description

One-component cement and polymer-based waterproof tile adhesive. It is used for fixing floor and wall ceramic tiles, natural stone tiles, granite, marble, pool glass-ceramic tiles, as well as for fixing ceramic tiles by applying “tile on tile” installation.

Food 1
Product

HIDROKOL- Z

Image Technical leaflet
Description

One-component adhesive for brick laying-fixing and skim coating of lightweight concrete elements, gypsum blocks and plasterboard sheets.

Food 1
Product

STIROKOL-P

Image Technical leaflet
Description

One-component adhesion for fixing and skim coating of polystyrene sheets, extruded polystyrene sheets and compressed mineral wool. It is used for making façade thermal insulation systems.

Food 1
Product

ADINGPOKS- 1Т

Image Technical leaflet
Description

Two-component thixotropic epoxy adhesive with excellent adhesion properties. It is used for achieving strong bonds when fixing materials in construction, such as: marble, granite, natural stone, concrete and reinforced concrete elements and other materials on substrates made of concrete, metal, aluminium, etc. It can be used for repairing small areas of segregation in concrete surfaces, for skim coating and spackling of concrete and cement mortar surfaces. It can be used in vertical and horizont

Food 1
Product

ADINGPOKS Š

Description

Three-component, quick-setting, epoxy adhesive with dielectric properties. It is used for gluing rail tracks at the head of insulated rail joints. It is used as epoxy adhesive for gluing metal, marble, granite blocks or natural stone to substrates made of metal or steel when it is required to achieve high adhesion and excellent mechanical resistance. It is used on horizontal and vertical surfaces.

Food 1
Details
Product

FLUIDING

Image Declaration of performance
Image Technical leaflet
Description

Plasticiser based on naphthalene sulphonate. It is used in building construction in pumped and traditional concrete.

Food 1
Product

FLUIDING M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

FLUIDING M1M

Image Technical leaflet
Image Declaration of performance
Description

Plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of more than 120 minutes prior to placement

Food 1
Product

FLUIDING- МS

Image Technical leaflet
Image Declaration of performance
Description

Economical plasticiser based on lignosulphonate. It is used for manufacture of pumped and traditional concrete with transport duration of 60 to 120 minutes prior to placement.

Food 1
Product

SUPERFLUID

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on naphthalene sulphonate. It enables the achievement of high early and ultimate strengths of concrete.It is used in cast concrete with reduced W/C ratio for concreting heavily reinforced concrete sections and pumped concrete.

Food 1
Product

SUPERFLUID M1

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on naphthalene lignosulphonate. Enables the concrete to maintain consistency for longer period of time of 60 to 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID M1M

Image Technical leaflet
Image Declaration of performance
Description

Superplasticiser based on lignosulphonate. Enables the concrete to maintain consistency for period of time of over 120 minutes.It is applied in ready-mix transported concrete and pumped concrete, for concreting of large concrete sections and in concrete that needs to be re-vibrated.

Food 1
Product

SUPERFLUID- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Superplasticiser based on melamine formaldehydeIt is used in thermally treated concrete (steam curing) so that steam curing time is reduced by 20 to 50%.

Food 1
Product

SUPERFLUID 21M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete. It is used for manufacture of ready-mix transported concrete (up to 120 min.), concrete with high level of consistency and workability, pumped concrete, self-compacting concrete, etc.

Food 1
Product

SUPERFLUID 21M1M EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser for extended maintenance of the consistency and rheology properties of concrete (up to 180 min.)It is used in ready-mix transported concrete, for concreting in hot weather, in pumped concrete, etc.

Food 1
Product

SUPERFLUID- 21M1M

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser with extremely high level of water reduction.It is used for preparation of concrete with extremely high early and ultimate strengths, high mechanical and chemical resistance, high level of consistency and self-compacting concrete.

Food 1
Product

SUPERFLUID 21 EKO

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based superplasticiser. It enables the achievement of high early and ultimate compressive strengths of concrete.It is used for manufacture of concrete with high level of consistency and workability, self-compacting concrete, pumped concrete, etc.

Food 1
Product

SUPERFLUID 21F

Image Technical leaflet
Image Declaration of performance
Description

Polycarboxylate-based classical superplasticiser for concrete.It is used for achieving high early strengths in the manufacture of precast concrete elements (with or without steam curing), for quick release of the concrete elements from the formwork, prestressed bearers, etc.

Food 1
Product

ADING PAVER

Image Technical leaflet
Image Declaration of performance
Description

Admixture for manufacture of low consistency concrete –“earth moist concrete” (Slump=0) for mechanical production of precast concrete elements, paving elements (interlocking concrete pavers), concrete flooring tiles, concrete curbs, etc.

Food 1
Product

HIDROZIM- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Admixture for cold weather concreting at low ambient temperature of up to -20 °C

Food 1
Product

HIDROZIM FLUID

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Complex admixture for concrete used for concreting at low temperature (-20°C) with plasticising action.It enables water reduction of up to 20%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

HIDRONORMAL

Image Technical leaflet
Description

Admixture for water-tightness of cement mortars.

Food 1
Product

HIDROFOB- T

Image Technical leaflet
Image Declaration of performance
Description

Admixture for water-tightness of concrete.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It prevents the occurrence of capillary absorption of moisture in concrete.

Food 1
Product

HIDROFOB- 21

Image Technical leaflet
Image Declaration of performance
Description

Admixture for concrete and mortar used for preventing capillary absorption and forming waterproof surfaces.In precast concrete elements with painted surfaces, apart from providing water-tightness, HIDROFOB-21 prevents the formation of salt deposits on the surface of concrete. HIDROFOB-21 is also a universal agent for formation of transparent water-repellent impregnation of porous surfaces made of concrete, bricks, natural stone, etc.

Food 1
Product

HIDROFOB FLUID

Image Technical leaflet
Image Declaration of performance
Description

Complex admixture for water-tightness of concrete with plasticising action.It is used for construction of foundations, pools, reservoirs, dams, ports, canal irrigation systems, water catchments, manholes, etc.It enables water reduction of up to 15%, thus providing easier placement and higher strength properties of the concrete.

Food 1
Product

INGUNIT- T

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- T ЕКО

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Alkali-free admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry and wet mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

INGUNIT- P

Image Technical leaflet
Description

Alkaline admixture for accelerating the setting of concrete and mortar.It is used in shotcrete (dry mix process), for tunnels, slope stabilisation, etc.

Food 1
Product

USPORUVAC - D2 (RETARDER- D2)

Image Technical leaflet
Image Declaration of performance
Description

Set retarding admixture for concrete. It is used for:ready-mix concrete transported over long distances, concreting at high temperatures, concreting of massive concrete sections.It enables water reduction of up to 10%.

Food 1
Product

POROCINITEL

Image Technical leaflet
Image Declaration of performance
Description

Admixture for formation of air micro-pores in concrete and cement mortar which makes it resistant to ice and salts.It is used for concreting of:airport runways, concrete road surfaces, curbs, drain channels, etc.

Food 1
Product

VRSKA - U (BOND- U)

Image Technical leaflet
Description

Admixture for adhesion, elasticity and water-tightness of mortar and concrete mixtures.It is most often used for repairing concrete structures.It is used as a primer for improving the bond between the old and new concrete (mortar) and for achieving surface impregnation of cement substrates.

Food 1
Product

INTENZIFIKATOR

Image Technical leaflet
Image SDS
Description

Grinding aid used for improving cement milling (grinding) with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

INTENZIFIKATOR- AM

Image Technical leaflet
Description

Grinding aid used for improving clinker grinding.

Food 1
Product

INTENZIFIKATOR- 30V

Image Technical leaflet
Description

Grinding aid used for improving the milling (grinding) of cement containing limestone additives with the effect of enhancing early strength development and increasing ultimate strength properties.

Food 1
Product

POROMEL - U

Image Declaration of performance
Image Technical leaflet
Description

Mortar admixture with combined action – plasticiser and air entraining admixture. It is used for production of rendering compounds.

Food 1
Product

Superfluid 21MS EKO

Image Technical leaflet
Description

Superplasticizer for concrete, based on polycarboxylates. Superfluid 21MS ЕКО enables high water reduction, as well as production of concrete with high consistency class.

Food 1
Product

ADINGPOKS- N

Image Technical leaflet
Image Declaration of performance
Description

Three-component, solvent-free, epoxy adhesive for bonding new to old concrete, cement screed, etc. It has excellent adhesion to substrate. It has high compressive strength, adhesive strength and shear strength. The product can be applied on a wet substrate. It can be applied on horizontal and vertical surfaces. It is eco-friendly and solvent-free. No shrinkage occurs in the process of bonding.

Food 1
Product

REPARATUR PENETRAT

Image Technical leaflet
Image SDS
Description

Pre-coating (primer) used for improving the bond between old and new concrete or cement mortar. It acts as a stabiliser of the old and damaged cement surfaces. It is recommended for repair by using Reparatur Malter-F.

Food 1
Product

REPARATUR MALTER - F1

Image Technical leaflet
Description

Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 7mm.The diameter of the filler nozzle should not exceed:1mm

Food 1
Product

REPARATUR MALTER - F2

Image Technical leaflet
Image Declaration of performance
Image SDS
Description

Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 15mm.The diameter of the filler nozzle should not exceed: 2mm.

Food 1
Product

REPARATUR MALTER- F4

Image Technical leaflet
Image Declaration of performance
Description

Polymer-modified, fibre-reinforced, cement-based repair mortar used for repairing concrete and reinforced concrete elements. It has high compressive and tensile strength and excellent adhesion to concrete substrate. When applied, the thickness of one layer may not exceed 20mm.The diameter of the filler nozzle should not exceed: 4mm.

Food 1
Product

REPARATUR GLET

Image Technical leaflet
Image Declaration of performance
Description

Polymer-modified, cement-based levelling compound for concrete surfaces and repaired concrete surfaces. Compliant to EN 1504-3

Food 1
Product

UBRZUVAC-C (ACCELERATOR-C)

Image Technical leaflet
Description

A quick setting cement based compound. It is used for filling active water leaks or in case of emergence of drops of water on underground facilities, dams, reservoirs, pools, tunnels, mining shafts, basements, shelters, retaining walls, etc.

Food 1
Product

ADINGPOKS- I

Image Technical leaflet
Description

Low viscosity, two-component, solvent-free, epoxy resin grout for injecting cracks with thickness of 0.1 to 5.0 mm by using injection and grout pumps. It is used for injecting cracks in substrates of concrete, reinforced concrete, stone and cement mortar. It has high compressive strength and chemical and mechanical resistance. It is used for repairing massive concrete structures, reservoirs, bridge structures, silos, cooling towers, stone structures, etc.

Food 1
Product

Reparatur malter - FS 2

Image Technical leaflet
Description

One-component, cement-based, microfiber reinforced system for repair of concrete and reinforced-concrete structures, intended for mechanical application by spraying (shotcrete application).

Food 1
Product

Reparatur malter - FS 4

Image Technical leaflet
Description

One-component, cement-based, microfiber reinforced system for repair of concrete and reinforced-concrete structures, intended for mechanical application by spraying (shotcrete application).

Food 1
Product

HIDROMAL

Image Technical leaflet
Description

Waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, settling tanks, water treatment plants, underground reinforced concrete wall and floor surfaces, potable water reservoirs, sanitary blocks, etc. It allows direct installation of ceramic tiles. It is easy to apply and non-toxic. The product is resistant to bacteria. It has an excellent adhesion to substrate made of concrete and cement mortar.

Food 1
Product

HIDROMAL FLEKS

Image Technical leaflet
Image Declaration of performance
Description

Two-component, polymer modified, cement-based elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, reservoirs, external underground parts of facilities, sanitary blocks, kitchens, etc. It allows direct installation of ceramic tiles on it by applying building adhesives. It enables bridging of micro-cracks in the substrate.

Food 1
Product

HIDROMAL FLEKS 1

Image Technical leaflet
Description

Two-component, polymer modified, cement-based, highly elastic waterproofing. It is used for waterproofing of structures exposed to positive and negative hydrostatic pressures, such as: pools, water treatment plants, canals, concrete pipes, manholes, balconies, sanitary blocks, kitchens, external underground parts of facilities. Resistant to external influences; may be used for contact with potable water; enables direct installation of ceramic tiles on it by applying building adhesives. It enable

Food 1
Product

ADINGFLEKS

Image Technical leaflet
Image color chart
Description

Ready-to-use acrylate-based compound for elastic waterproofing of underground parts of facilities, terraces, balconies, kitchens, sanitary blocks, non-trafficable roof terraces, etc. In substrates in which strains and cracks are expected, ADINGFLEKS can be reinforced with alkali-free glass fibre grid.

Food 1
Details
Product

ADINGPOKS- 1P EKO

Image Technical leaflet
Description

It is used as a primer for all epoxy systems from the Adingpoks programme. It is used for impregnating substrates of concrete surfaces or cement or epoxy mortar surfaces. The product is recommended to be used as a primer prior to the application of epoxy floor finish as closed substrates. It has strong substrate penetration and excellent adhesion to substrate. Good resistance to weak acid solutions, salt solutions and mineral oils. Resistant to crude oil and petroleum products. It is solvent-fre

Food 1
Product

ADINGPOKS- 1PV

Image Technical leaflet
Description

A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Food 1
Product

ADINGPOKS- 1B EKO

Image Technical leaflet
Image Color Chart
Image Declaration of performance
Image SDS 1
Image SDS 2
Description

Two-component, solvent-free epoxy coating. It is used for protective and decorative finishing of substrates made of concrete, cement mortar or steel. It is used in surfaces exposed to mechanical or chemical hazards, such as: Warehouses, garages, car parks, hospitals, manufacturing plants, laboratories, foodstuff production facilities, wine tanks, etc.

Food 1
Product

ADINGPOKS- 2 EKO

Image Technical leaflet
Image Color Chart
Description

Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Food 1
Product

ADINGPOKS- 1 EKO

Image Technical leaflet
Description

Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Food 1
Product

ADINGSTATIK EKO

Image Technical leaflet
Description

Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Food 1
Product

ADINGPOKS 1P

Image Technical leaflet
Description

Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Food 1
Product

ADINGFAVORIT

Image Technical leaflet
Description

Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Food 1
Product

PODING- К

Image Technical leaflet
Description

Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Food 1
Product

PLAMMAL- S

Image Technical leaflet
Description

One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Food 1
Product

PLAMMAL- 3D

Image Technical leaflet
Description

Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Food 1
Product

ADINGKOLOR

Image Technical leaflet
Description

Water-based dispersion paint. It is used for finishing of internal wall and ceiling surfaces. It has good coverage rate, vivid white colour and is resistant to bacteria. The application of Adingkolor disinfects the area.

Food 1
Product

ADINGKOLOR- F

Image Technical leaflet
Description

Acrylate façade paint for decorative and protective finishing of concrete, rendered or skim coated external wall surfaces. It is also used for repair and reconstruction of old building facades. The application of Adingkolor F provides protection to the treated surfaces against weather phenomena and prevents the occurrence of surface damages on the substrate. Prior to applying Adingkolor-F, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGKOLOR-RB

Image Technical leaflet
Image color chart
Description

Finishing paint for pools based on synthetic resins and solvents. It is used for decorative and protective finishing of concrete and rendered surfaces exposed to permanent contact with water, UV radiation, weather phenomena, as well as of surfaces maintained with the use of chemical agents. The coating meets the elasticity requirement for this type of paint.

Food 1
Product

ADINGKOLOR- RF

Image Technical leaflet
Image color chart
Description

Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Food 1
Product

ADINGMARKER

Image Technical leaflet
Image color chart
Description

Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGMARKER-P

Image Technical leaflet
Image color chart
Description

Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Food 1
Product

DEKO BETON

Image Technical leaflet
Description

Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Food 1
Product

DEKO SIL

Image Technical leaflet
Description

Transparent coating based on synthetic resins and solvents. It is used for surface impregnation and as protective finishing (lacquer) of concrete surfaces against weather phenomena and low-grade chemical aggression. The product should be diluted with Rastvoruvac P (Solvent P).In highly porous substrates, it can be used undiluted as a supplement in the application of the first layer of the solvent-based paints Adingkolor-RF and Adingmarker-P.

Food 1
Product

ADINGFAS- Z

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with coarse grained structure (polymer cement-based)It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS-Z

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

ADINGFAS

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with uniform structure (polymer cement-based).It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

PRIMER - V

Image Technical leaflet
Description

Pre-coating used for priming of internal and external surfaces prior to the application of decorative and protective finishes based on water dispersion in mortars and flooring systems. It is applied on a substrate made of concrete, asphalt, mortar, plasterboard, stone, bricks, old coatings, etc.

Food 1
Product

АDING BETOKONTAKT

Image Technical leaflet
Description

Ading Betokontakt is a material used for providing roughness in smooth surfaces, thus improving the bond between the substrate and the material applied. It is used when rendering mechanical mortar or when applying cement-based adhesives on concrete s u r f a c e s , p r e - c a s t c o n c r e t e e l e m e n t s a n d plasterboard sheets. It is recommended for positions that require an extended application time of the material (mortar or adhesive).

Food 1
Product

Dekosil V

Image Technical leaflet
Description

Product for impregnation, curing and protection of new and old concrete surfaces. It is used as a product for curing and protection of fresh concrete surfaces made of polished or stamped concrete, natural stone surfaces, concrete elements – concrete pipes, concrete paving elements, pavement curbs, old concrete surfaces, concrete slabs.

Food 1
Details
Product

ADINGPOKS- 1P EKO

Image Technical leaflet
Description

It is used as a primer for all epoxy systems from the Adingpoks programme. It is used for impregnating substrates of concrete surfaces or cement or epoxy mortar surfaces. The product is recommended to be used as a primer prior to the application of epoxy floor finish as closed substrates. It has strong substrate penetration and excellent adhesion to substrate. Good resistance to weak acid solutions, salt solutions and mineral oils. Resistant to crude oil and petroleum products. It is solvent-fre

Food 1
Product

ADINGPOKS- 1PV

Image Technical leaflet
Description

A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Food 1
Product

ADINGPOKS- 1B EKO

Image Technical leaflet
Image Color Chart
Image Declaration of performance
Image SDS 1
Image SDS 2
Description

Two-component, solvent-free epoxy coating. It is used for protective and decorative finishing of substrates made of concrete, cement mortar or steel. It is used in surfaces exposed to mechanical or chemical hazards, such as: Warehouses, garages, car parks, hospitals, manufacturing plants, laboratories, foodstuff production facilities, wine tanks, etc.

Food 1
Product

ADINGPOKS- 2 EKO

Image Technical leaflet
Image Color Chart
Description

Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Food 1
Product

ADINGPOKS- 1 EKO

Image Technical leaflet
Description

Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Food 1
Product

ADINGSTATIK EKO

Image Technical leaflet
Description

Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Food 1
Product

ADINGPOKS 1P

Image Technical leaflet
Description

Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Food 1
Product

ADINGFAVORIT

Image Technical leaflet
Description

Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Food 1
Product

PODING- К

Image Technical leaflet
Description

Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Food 1
Product

PLAMMAL- S

Image Technical leaflet
Description

One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Food 1
Product

PLAMMAL- 3D

Image Technical leaflet
Description

Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye

Food 1
Product

ADINGKOLOR

Image Technical leaflet
Description

Water-based dispersion paint. It is used for finishing of internal wall and ceiling surfaces. It has good coverage rate, vivid white colour and is resistant to bacteria. The application of Adingkolor disinfects the area.

Food 1
Product

ADINGKOLOR- F

Image Technical leaflet
Description

Acrylate façade paint for decorative and protective finishing of concrete, rendered or skim coated external wall surfaces. It is also used for repair and reconstruction of old building facades. The application of Adingkolor F provides protection to the treated surfaces against weather phenomena and prevents the occurrence of surface damages on the substrate. Prior to applying Adingkolor-F, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGKOLOR-RB

Image Technical leaflet
Image color chart
Description

Finishing paint for pools based on synthetic resins and solvents. It is used for decorative and protective finishing of concrete and rendered surfaces exposed to permanent contact with water, UV radiation, weather phenomena, as well as of surfaces maintained with the use of chemical agents. The coating meets the elasticity requirement for this type of paint.

Food 1
Product

ADINGKOLOR- RF

Image Technical leaflet
Image color chart
Description

Floor paint based on synthetic resins and solvents. It is used for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces of warehouses, garages, manufacturing plants, etc.

Food 1
Product

ADINGMARKER

Image Technical leaflet
Image color chart
Description

Acrylate-based floor coating. It is used for marking traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. Prior to applying Adingmarker, it is recommended to prime the substrate with Primer-V.

Food 1
Product

ADINGMARKER-P

Image Technical leaflet
Image color chart
Description

Coating based on synthetic resins and solvents. It is used for marking roads and traffic signalisation and for decorative and protective floor and wall finishing of concrete, rendered and asphalt surfaces exposed to environmental hazards. The coating meets the elasticity and UV resistance requirements for this type of coatings.

Food 1
Product

DEKO BETON

Image Technical leaflet
Description

Ready-to-use solution that chemically reacts with hardened concrete and produces permanent, colour decorative effects. It is used for decorating internal and external floor and wall surfaces, as well as for surfaces with precast concrete elements.

Food 1
Product

DEKO SIL

Image Technical leaflet
Description

Transparent coating based on synthetic resins and solvents. It is used for surface impregnation and as protective finishing (lacquer) of concrete surfaces against weather phenomena and low-grade chemical aggression. The product should be diluted with Rastvoruvac P (Solvent P).In highly porous substrates, it can be used undiluted as a supplement in the application of the first layer of the solvent-based paints Adingkolor-RF and Adingmarker-P.

Food 1
Product

ADINGFAS- Z

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with coarse grained structure (polymer cement-based)It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS-Z

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

HIDROFAS

Image Technical leaflet
Image Declaration of performance
Description

Acrylate emulsion-based decorative mortar with coarse grained structure. It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

ADINGFAS

Image Technical leaflet
Image Declaration of performance
Description

Mineral-based decorative render with uniform structure (polymer cement-based).It is used for decorative and protective finishing of concrete, rendered, skim coated internal and external wall surfaces or for finishing of facade thermal insulation systems. Primer-V is used as a substrate.

Food 1
Product

PRIMER - V

Image Technical leaflet
Description

Pre-coating used for priming of internal and external surfaces prior to the application of decorative and protective finishes based on water dispersion in mortars and flooring systems. It is applied on a substrate made of concrete, asphalt, mortar, plasterboard, stone, bricks, old coatings, etc.

Food 1
Product

АDING BETOKONTAKT

Image Technical leaflet
Description

Ading Betokontakt is a material used for providing roughness in smooth surfaces, thus improving the bond between the substrate and the material applied. It is used when rendering mechanical mortar or when applying cement-based adhesives on concrete s u r f a c e s , p r e - c a s t c o n c r e t e e l e m e n t s a n d plasterboard sheets. It is recommended for positions that require an extended application time of the material (mortar or adhesive).

Food 1
Product

Dekosil V

Image Technical leaflet
Description

Product for impregnation, curing and protection of new and old concrete surfaces. It is used as a product for curing and protection of fresh concrete surfaces made of polished or stamped concrete, natural stone surfaces, concrete elements – concrete pipes, concrete paving elements, pavement curbs, old concrete surfaces, concrete slabs.

Food 1
Details
Product

ADINGPOKS- 1P EKO

Image Technical leaflet
Description

It is used as a primer for all epoxy systems from the Adingpoks programme. It is used for impregnating substrates of concrete surfaces or cement or epoxy mortar surfaces. The product is recommended to be used as a primer prior to the application of epoxy floor finish as closed substrates. It has strong substrate penetration and excellent adhesion to substrate. Good resistance to weak acid solutions, salt solutions and mineral oils. Resistant to crude oil and petroleum products. It is solvent-fre

Food 1
Product

ADINGPOKS- 1PV

Image Technical leaflet
Description

A two-component, low viscosity, epoxy pre-coat for wet concrete substrates.

Food 1
Product

ADINGPOKS- 1B EKO

Image Technical leaflet
Image Color Chart
Image Declaration of performance
Image SDS 1
Image SDS 2
Description

Two-component, solvent-free epoxy coating. It is used for protective and decorative finishing of substrates made of concrete, cement mortar or steel. It is used in surfaces exposed to mechanical or chemical hazards, such as: Warehouses, garages, car parks, hospitals, manufacturing plants, laboratories, foodstuff production facilities, wine tanks, etc.

Food 1
Product

ADINGPOKS- 2 EKO

Image Technical leaflet
Image Color Chart
Description

Self-levelling epoxy system for finishing of concrete floors in: Laboratories, warehouses, garages, car parks, foodstuff production facilities, hospitals, etc. It is recommended for finishing of floors in foodstuff production facilities which are required to be resistant to hazards, abrasion, etc. The floor has excellent monolithic aesthetic finish without joints. It has a good abrasion and mechanical resistance. It is non-toxic when set. It can be produced in various RAL colours.

Food 1
Product

ADINGPOKS- 1 EKO

Image Technical leaflet
Description

Two-component, low viscosity, epoxy resin for preparation of epoxy putty and transparent chemically resistant epoxy finish for protection of concrete and cement or steel wall and floor surfaces. It is used in foodstuff production facilities, storerooms, garages, laboratories, car parks, etc. The product is resistant to bacteria and easy to maintain. It is resistant to solutions of salts and mineral oils. It has excellent adhesion to various types of substrates, as well as high abrasion resistanc

Food 1
Product

ADINGSTATIK EKO

Image Technical leaflet
Description

Three-component epoxy system without solvent. It is used as a static conductive floor with a resistance between 5 x 104 and 1 x 106, in production facilities for electronic equipment, hospital operating theatres, electronic laboratories, com-puter centers, production plants and warehouses for paints, varnishes and solvents, plants for manufacture of fabrics and fibres, "clean" premises.

Food 1
Product

ADINGPOKS 1P

Image Technical leaflet
Description

Low viscosity, solvent-free, epoxy pre-coat. It is used as a pre-coat to any epoxy system that should be applied on concrete and cement substrates with high porosity. It can be used for impregnating concrete substrates and cement mortar surfaces. It has excellent adhesion to substrate and penetration in porous substrates. Resistant to crude oil and petroleum products. It is resistant to weak solutions of bases and acids.

Food 1
Product

ADINGFAVORIT

Image Technical leaflet
Description

Adingfavorit is a high-quality acrylic floor finish ideal for indoor or outdoor sports grounds for recreational purposes, such as tennis, volleyball, futsal, basketball, etc. It is also used for decorative finishing of walking paths, cycle lanes, squares, terraces, etc. - Excellent adhesion, especially to asphalted concrete substrate; - Resistant to abrasion and UV radiation; - It is solvent-free and non-toxic. - Waterproof; - Decorative – manufactured in various colours and tones; - Monolithic

Food 1
Product

PODING- К

Image Technical leaflet
Description

Mineral coloured coating for surface strengthening of mechanically loaded cement-based floor surfaces, such as: car parks, warehouses, automobile repair shops, petrol stations, cold storage facilities, heliports, etc. It should be applied (rubbed in) on fresh concrete substrates in layers of 3 – 5 mm. The product is water-tight and ice resistant. It is easy to apply and maintain

Food 1
Product

PLAMMAL- S

Image Technical leaflet
Description

One-component elastic compound for fire protection of electric cables, that is, prevention of fire spreading through electric cables and installations. It is elastic and has excellent adhesion to the substrate. It is used for penetrations of cables and installations through walls and partitions in combination with mineral wool for providing fire protection sectors. The product is weatherproof.

Food 1
Product

PLAMMAL- 3D

Image Technical leaflet
Description

Fire protection system for external and internal steel structures in various types of construction buildings: manufacturing plants, sports halls, hydroelectric power stations, hotels, thermal power stations, nuclear power stations, warehouses, shopping centres, etc. The PLAMAL 3D system consists of three layers of coatings: -PLAMAL 3D ground (anti-corrosion epoxy coating) -PLAMAL 3D expansive (basic expanding methacrylate coating) -PLAMAL 3D lacquer (protective decorative coating) All three laye